29 Jun Micro Sandblasters EV-2 Model
Conformal Coating Removal | SWAM Blaster MV2L with Complete Work Cell (CWC)
SWAM BLASTER™ Models | EV, MV Series
MV/EV Series SWAM Blaster + TURBO-Max™ Work Chamber
TURBO-Station™ + SWAM Blaster™ (EV, MV Series)
The Model EV-2, Micro Swam Blaster is designed with independently adjustable powder flow control, air pressure regulation for total process control, and brass fittings throughout the abrasive pathway.
When detail is required, the powder flow is turned down to reduce the amount of the powder being vibrated into the abrasive/air pathway thus allowing the use of very small nozzle tips. For more aggressive requirements, the air pressure, powder flow and the nozzle tip diameter can be increased.
An assortment of nozzle styles and sizes, a wide variety of powder types and particles sizes, and interchangeable orifice plates are available to accomplish various applications.
The model EV-2 works with a nozzle range from 0.007″ up to 0.032″.
| Item Number | #6046-1 |
|---|---|
| Min Air Requirement: 40 psi (276 kPa) | Max Air Requirement: 140 psi (965 kPa) maximum |
| Size: 13″ W x 11″ D x 13″H | Shipping Weight: 58 pounds (26.4kg) |
| Shipping Size: 24″ W x 15″ D 15″ H | Other Power: 110V/50Hz, 110V/60Hz & 230V/50/60Hz |