Precision Makes Perfection

Micro Abrasive Equipment
and Job Shop Services

Precision Manual and Automated Micro Abrasive Equipment

The ECO-BLAST® and SWAM BLAST® lines of Micro Abrasive Blasting Systems are designed to achieve refined precision, ranging from the simplest of tasks to the most challenging.For decades, CRYSTAL MARK, INC. has specialized in the field of micro abrasion technology. We are involved in all aspects of micro abrasive processing as automaters, manufacturers and end users. We offer manual, automated and custom systems as well as Job Shop Services to accommodate a number of diverse applications.

Working together with our customers as both manufacturers and end users, we have developed a full product line that enhances micro abrasion technology in more than one industry. As a result, we are the recognized leader and innovator in micro abrasive processing.

Consider the Possibilities with Micro Abrasive Processing

• Coring and contouring of semiconductor wafers
• Demarking of electronic devices
• Conformal coating removal
• Precise deburring of medical components
• Glass beading of machined parts
• Decorative glass engraving
• Preparation of delicate fossils, gems, minerals and artifacts
• Surface finishing for light diffusion
• Surface texturing for increased adhesion
• Selective material removal
• Micro hole drilling in thin brittle materials

Automated Systems

Precise, Accurate and Complete for Total Process Control

•  SWAM® Belt Abrader

Precisely abrades uniform
finishes to surfaces requiring
exact repeatability.

• SWAM® SRT
  Deburring Station

Specifically textures and deburrs a
variety of components including
medical and dental implants and
screws.

• SWAM® NozPoz
  Nozzle Positioning System

Manipulates a nozzle over a work
piece per the customers
requirements.

• SWAM® C-5100 Wafer
  Coring and Contouring System

Cores and edge rounds silicon, silicon
carbide, sapphire, Geranium, NaG,
GaAs, and other III-V materials as well
as removes Epi Crown.

• SWAM® Wire Abrader

Consistently abrades the outside
diameter of a wire ranging from .010″
to .060″ in diameter standard.

• SWAM® D-MK
  Demarking System

Demark components including DIP,
SOJ, SOIC, PLCC, and other types of
packages.

Manual Systems

The SWAM-BLASTER® line of Micro Abrasive Blasters are complete, accurate and precise. With independently adjustable powder flow control and air pressure regulation, Total Process Control can be achieved.

The SWAM BLASTERs™ introduce a defined amount of abrasive powder into a controlled stream of compressed air through the abrasive pathway and out of a selected nozzle tip. When detail is required, the powder flow can be turned down to reduce the amount of powder being introduced into the abrasive pathway thus, allowing the use of a very small nozzle tip. For more aggressive requirements, the air pressure, powder flow and the nozzle tip diameter can be increased.

The ECO-BLASTER Micro Abrasive Blaster

Is an innovative product that utilizes a unique pressure feed system to propel abrasive powder into a high pressure air stream and out through the hand piece and nozzle assembly. By accelerating the abrasive powder to high velocities with high pressure gas, a multitude of tasks are achieved.

Model EV-2 Micro Abrasive Blaster

• Brass fittings throughout the abrasive pathway
• A nozzle range from .007″ up to .040″

Model EV-2L Micro Abrasive Blaster

• Carbide lined fittings throughout the abrasive pathway
• A nozzle range from .018″ up to .060″

Model MV-2 Micro Abrasive Blaster

• Tilting powder tank to allow for rapid powder changes
• Carbide lined fittings throughout the abrasive pathway
•  A nozzle range from .007″ up to .040″

Model MV-2L Micro Abrasive Blaster

• Tilting powder tank to allow for rapid powder changes
• Carbide lined fittings throughout the abrasive pathway
• A nozzle range from .018″ up to .060″

Model MV-241 Micro Abrasive Blaster

• Tilting powder tank to allow for rapid powder changes
• Carbide lined fittings throughout the abrasive pathway
• A nozzle range from .007″ up to .060″

Model LV-1 Micro Abrasive Blaster

• A leak detection system for the pinch valve assemblies
• A separate mixing powder tank for a consistent powder feed rate from a full tank to an empty tank.
• A nozzle range from .018″ up to .060″

Model XV-1 Micro Abrasive Blaster

• Similar to the Model LV-1
• Equipped with larger hoses and fittings throughout the abrasive/air pathway.
• A nozzle range from .032″ up to .090″

For more questions Contact Us at Toll free # 800-659-7926 or 818-240-7520

E-mail:sales@crystalmarkinc.com